home *** CD-ROM | disk | FTP | other *** search
/ Mac Easy 2010 May / Mac Life Ubuntu.iso / casper / filesystem.squashfs / usr / src / linux-headers-2.6.28-15 / arch / cris / arch-v10 / Kconfig
Encoding:
Text File  |  2008-12-24  |  11.3 KB  |  399 lines

  1. if ETRAX_ARCH_V10
  2.  
  3. menu "CRIS v10 options"
  4.  
  5. # ETRAX 100LX v1 has a MMU "feature" requiring a low mapping
  6. config CRIS_LOW_MAP
  7.     bool
  8.     depends on ETRAX_ARCH_V10 && ETRAX100LX
  9.     default y
  10.  
  11. config ETRAX_DRAM_VIRTUAL_BASE
  12.     hex
  13.     depends on ETRAX_ARCH_V10
  14.     default "c0000000" if !ETRAX100LX
  15.     default "60000000" if ETRAX100LX
  16.  
  17. choice
  18.     prompt "Product LED port"
  19.     depends on ETRAX_ARCH_V10
  20.     default ETRAX_PA_LEDS
  21.  
  22. config ETRAX_PA_LEDS
  23.     bool "Port-PA-LEDs"
  24.     help
  25.       The ETRAX network driver is responsible for flashing LED's when
  26.       packets arrive and are sent.  It uses macros defined in
  27.       <file:include/asm-cris/io.h>, and those macros are defined after what
  28.       YOU choose in this option.  The actual bits used are configured
  29.       separately.  Select this if the LEDs are on port PA.  Some products
  30.       put the leds on PB or a memory-mapped latch (CSP0) instead.
  31.  
  32. config ETRAX_PB_LEDS
  33.     bool "Port-PB-LEDs"
  34.     help
  35.       The ETRAX network driver is responsible for flashing LED's when
  36.       packets arrive and are sent.  It uses macros defined in
  37.       <file:include/asm-cris/io.h>, and those macros are defined after what
  38.       YOU choose in this option.  The actual bits used are configured
  39.       separately.  Select this if the LEDs are on port PB.  Some products
  40.       put the leds on PA or a memory-mapped latch (CSP0) instead.
  41.  
  42. config ETRAX_CSP0_LEDS
  43.     bool "Port-CSP0-LEDs"
  44.     help
  45.       The ETRAX network driver is responsible for flashing LED's when
  46.       packets arrive and are sent. It uses macros defined in
  47.       <file:include/asm-cris/io.h>, and those macros are defined after what
  48.       YOU choose in this option.  The actual bits used are configured
  49.       separately.  Select this if the LEDs are on a memory-mapped latch
  50.       using chip select CSP0, this is mapped at 0x90000000.
  51.       Some products put the leds on PA or PB instead.
  52.  
  53. config ETRAX_NO_LEDS
  54.     bool "None"
  55.     help
  56.       Select this option if you don't have any LED at all.
  57.  
  58. endchoice
  59.  
  60. config ETRAX_LED1G
  61.     int "First green LED bit"
  62.     depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
  63.     default "2"
  64.     help
  65.       Bit to use for the first green LED.
  66.       Most Axis products use bit 2 here.
  67.  
  68. config ETRAX_LED1R
  69.     int "First red LED bit"
  70.     depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
  71.     default "3"
  72.     help
  73.       Bit to use for the first red LED.
  74.       Most Axis products use bit 3 here.
  75.       For products with only one controllable LED,
  76.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  77.  
  78. config ETRAX_LED2G
  79.     int "Second green LED bit"
  80.     depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
  81.     default "4"
  82.     help
  83.       Bit to use for the second green LED. The "Active" LED.
  84.       Most Axis products use bit 4 here.
  85.       For products with only one controllable LED,
  86.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  87.  
  88. config ETRAX_LED2R
  89.     int "Second red LED bit"
  90.     depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
  91.     default "5"
  92.     help
  93.       Bit to use for the second red LED.
  94.       Most Axis products use bit 5 here.
  95.       For products with only one controllable LED,
  96.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  97.  
  98. config ETRAX_LED3G
  99.     int "Third green LED bit"
  100.     depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
  101.     default "2"
  102.     help
  103.       Bit to use for the third green LED. The "Drive" LED.
  104.       For products with only one or two controllable LEDs,
  105.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  106.  
  107. config ETRAX_LED3R
  108.     int "Third red LED bit"
  109.     depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
  110.     default "2"
  111.     help
  112.       Bit to use for the third red LED.
  113.       For products with only one or two controllable LEDs,
  114.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  115.  
  116. config ETRAX_LED4R
  117.     int "Fourth red LED bit"
  118.     depends on ETRAX_CSP0_LEDS
  119.     default "2"
  120.     help
  121.       Bit to use for the fourth red LED.
  122.       For products with only one or two controllable LEDs,
  123.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  124.  
  125. config ETRAX_LED4G
  126.     int "Fourth green LED bit"
  127.     depends on ETRAX_CSP0_LEDS
  128.     default "2"
  129.     help
  130.       Bit to use for the fourth green LED.
  131.       For products with only one or two controllable LEDs,
  132.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  133.  
  134. config ETRAX_LED5R
  135.     int "Fifth red LED bit"
  136.     depends on ETRAX_CSP0_LEDS
  137.     default "2"
  138.     help
  139.       Bit to use for the fifth red LED.
  140.       For products with only one or two controllable LEDs,
  141.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  142.  
  143. config ETRAX_LED5G
  144.     int "Fifth green LED bit"
  145.     depends on ETRAX_CSP0_LEDS
  146.     default "2"
  147.     help
  148.       Bit to use for the fifth green LED.
  149.       For products with only one or two controllable LEDs,
  150.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  151.  
  152. config ETRAX_LED6R
  153.     int "Sixth red LED bit"
  154.     depends on ETRAX_CSP0_LEDS
  155.     default "2"
  156.     help
  157.       Bit to use for the sixth red LED.
  158.       For products with only one or two controllable LEDs,
  159.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  160.  
  161. config ETRAX_LED6G
  162.     int "Sixth green LED bit"
  163.     depends on ETRAX_CSP0_LEDS
  164.     default "2"
  165.     help
  166.       Bit to use for the sixth green LED. The "Drive" LED.
  167.       For products with only one or two controllable LEDs,
  168.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  169.  
  170. config ETRAX_LED7R
  171.     int "Seventh red LED bit"
  172.     depends on ETRAX_CSP0_LEDS
  173.     default "2"
  174.     help
  175.       Bit to use for the seventh red LED.
  176.       For products with only one or two controllable LEDs,
  177.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  178.  
  179. config ETRAX_LED7G
  180.     int "Seventh green LED bit"
  181.     depends on ETRAX_CSP0_LEDS
  182.     default "2"
  183.     help
  184.       Bit to use for the seventh green LED.
  185.       For products with only one or two controllable LEDs,
  186.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  187.  
  188. config ETRAX_LED8Y
  189.     int "Eighth yellow LED bit"
  190.     depends on ETRAX_CSP0_LEDS
  191.     default "2"
  192.     help
  193.       Bit to use for the eighth yellow LED. The "Drive" LED.
  194.       For products with only one or two controllable LEDs,
  195.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  196.  
  197. config ETRAX_LED9Y
  198.     int "Ninth yellow LED bit"
  199.     depends on ETRAX_CSP0_LEDS
  200.     default "2"
  201.     help
  202.       Bit to use for the ninth yellow LED.
  203.       For products with only one or two controllable LEDs,
  204.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  205.  
  206. config ETRAX_LED10Y
  207.     int "Tenth yellow LED bit"
  208.     depends on ETRAX_CSP0_LEDS
  209.     default "2"
  210.     help
  211.       Bit to use for the tenth yellow LED.
  212.       For products with only one or two controllable LEDs,
  213.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  214.  
  215. config ETRAX_LED11Y
  216.     int "Eleventh yellow LED bit"
  217.     depends on ETRAX_CSP0_LEDS
  218.     default "2"
  219.     help
  220.       Bit to use for the eleventh yellow LED.
  221.       For products with only one or two controllable LEDs,
  222.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  223.  
  224. config ETRAX_LED12R
  225.     int "Twelfth red LED bit"
  226.     depends on ETRAX_CSP0_LEDS
  227.     default "2"
  228.     help
  229.       Bit to use for the twelfth red LED.
  230.       For products with only one or two controllable LEDs,
  231.       set this to same as CONFIG_ETRAX_LED1G (normally 2).
  232.  
  233.  
  234. choice
  235.     prompt "Product rescue-port"
  236.     depends on ETRAX_ARCH_V10
  237.     default ETRAX_RESCUE_SER0
  238.  
  239. config ETRAX_RESCUE_SER0
  240.     bool "Serial-0"
  241.     help
  242.       Select one of the four serial ports as a rescue port.  The default
  243.       is port 0.
  244.  
  245. config ETRAX_RESCUE_SER1
  246.     bool "Serial-1"
  247.     help
  248.       Use serial port 1 as the rescue port.
  249.  
  250. config ETRAX_RESCUE_SER2
  251.     bool "Serial-2"
  252.     help
  253.       Use serial port 2 as the rescue port.
  254.  
  255. config ETRAX_RESCUE_SER3
  256.     bool "Serial-3"
  257.     help
  258.       Use serial port 3 as the rescue port.
  259.  
  260. endchoice
  261.  
  262. config ETRAX_DEF_R_WAITSTATES
  263.     hex "R_WAITSTATES"
  264.     depends on ETRAX_ARCH_V10
  265.     default "95a6"
  266.     help
  267.       Waitstates for SRAM, Flash and peripherals (not DRAM).  95f8 is a
  268.       good choice for most Axis products...
  269.  
  270. config ETRAX_DEF_R_BUS_CONFIG
  271.     hex "R_BUS_CONFIG"
  272.     depends on ETRAX_ARCH_V10
  273.     default "104"
  274.     help
  275.       Assorted bits controlling write mode, DMA burst length etc.  104 is
  276.       a good choice for most Axis products...
  277.  
  278. config ETRAX_SDRAM
  279.     bool "SDRAM support"
  280.     depends on ETRAX_ARCH_V10
  281.     help
  282.       Enable this if you use SDRAM chips and configure
  283.       R_SDRAM_CONFIG and R_SDRAM_TIMING as well.
  284.  
  285. config ETRAX_DEF_R_DRAM_CONFIG
  286.     hex "R_DRAM_CONFIG"
  287.     depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
  288.     default "1a200040"
  289.     help
  290.       The R_DRAM_CONFIG register specifies everything on how the DRAM
  291.       chips in the system are connected to the ETRAX CPU.  This is
  292.       different depending on the manufacturer, chip type and number of
  293.       chips.  So this value often needs to be different for each Axis
  294.       product.
  295.  
  296. config ETRAX_DEF_R_DRAM_TIMING
  297.     hex "R_DRAM_TIMING"
  298.     depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
  299.     default "5611"
  300.     help
  301.       Different DRAM chips have different speeds.  Current Axis products
  302.       use 50ns DRAM chips which can use the timing: 5611.
  303.  
  304. config ETRAX_DEF_R_SDRAM_CONFIG
  305.     hex "R_SDRAM_CONFIG"
  306.     depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
  307.     default "d2fa7878"
  308.     help
  309.       The R_SDRAM_CONFIG register specifies everything on how the SDRAM
  310.       chips in the system are connected to the ETRAX CPU.  This is
  311.       different depending on the manufacturer, chip type and number of
  312.       chips.  So this value often needs to be different for each Axis
  313.       product.
  314.  
  315. config ETRAX_DEF_R_SDRAM_TIMING
  316.     hex "R_SDRAM_TIMING"
  317.     depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
  318.     default "80004801"
  319.     help
  320.       Different SDRAM chips have different timing.
  321.  
  322. config ETRAX_DEF_R_PORT_PA_DIR
  323.     hex "R_PORT_PA_DIR"
  324.     depends on ETRAX_ARCH_V10
  325.     default "1c"
  326.     help
  327.       Configures the direction of general port A bits.  1 is out, 0 is in.
  328.       This is often totally different depending on the product used.
  329.       There are some guidelines though - if you know that only LED's are
  330.       connected to port PA, then they are usually connected to bits 2-4
  331.       and you can therefore use 1c.  On other boards which don't have the
  332.       LED's at the general ports, these bits are used for all kinds of
  333.       stuff.  If you don't know what to use, it is always safe to put all
  334.       as inputs, although floating inputs isn't good.
  335.  
  336. config ETRAX_DEF_R_PORT_PA_DATA
  337.     hex "R_PORT_PA_DATA"
  338.     depends on ETRAX_ARCH_V10
  339.     default "00"
  340.     help
  341.       Configures the initial data for the general port A bits.  Most
  342.       products should use 00 here.
  343.  
  344. config ETRAX_DEF_R_PORT_PB_CONFIG
  345.     hex "R_PORT_PB_CONFIG"
  346.     depends on ETRAX_ARCH_V10
  347.     default "00"
  348.     help
  349.       Configures the type of the general port B bits.  1 is chip select,
  350.       0 is port.  Most products should use 00 here.
  351.  
  352. config ETRAX_DEF_R_PORT_PB_DIR
  353.     hex "R_PORT_PB_DIR"
  354.     depends on ETRAX_ARCH_V10
  355.     default "00"
  356.     help
  357.       Configures the direction of general port B bits. 1 is out, 0 is in.
  358.       This is often totally different depending on the product used.  Bits
  359.       0 and 1 on port PB are usually used for I2C communication, but the
  360.       kernel I2C driver sets the appropriate directions itself so you
  361.       don't need to take that into consideration when setting this option.
  362.       If you don't know what to use, it is always safe to put all as
  363.       inputs.
  364.  
  365. config ETRAX_DEF_R_PORT_PB_DATA
  366.     hex "R_PORT_PB_DATA"
  367.     depends on ETRAX_ARCH_V10
  368.     default "ff"
  369.     help
  370.       Configures the initial data for the general port A bits.  Most
  371.       products should use FF here.
  372.  
  373. config ETRAX_SOFT_SHUTDOWN
  374.     bool "Software Shutdown Support"
  375.     depends on ETRAX_ARCH_V10
  376.     help
  377.       Enable this if ETRAX is used with a power-supply that can be turned
  378.       off and on with PS_ON signal. Gives the possibility to detect
  379.       powerbutton and then do a power off after unmounting disks.
  380.  
  381. config ETRAX_SHUTDOWN_BIT
  382.     int "Shutdown bit on port CSP0"
  383.     depends on ETRAX_SOFT_SHUTDOWN
  384.     default "12"
  385.     help
  386.       Configure what pin on CSPO-port that is used for controlling power
  387.       supply.
  388.  
  389. config ETRAX_POWERBUTTON_BIT
  390.     int "Power button bit on port G"
  391.     depends on ETRAX_SOFT_SHUTDOWN
  392.     default "25"
  393.     help
  394.       Configure where power button is connected.
  395.  
  396. endmenu
  397.  
  398. endif
  399.